TIMTRONICS - Thermal Interface Material  
 
Red Ice
High Temperature Thermal Compounds



Product Description:
Red Ice 600 series are high temperature stable thermal greases engineered with special aero space fluid technology to eliminate compound "dry out" problems due to continuous operating temperature above 200 °C. This series of thermal compounds has shown outstanding heat transfer and high temperature stability for all types of electronic and industrial applications. Recommended for aero space application because of low to zero out gassing, No dry out.

Typical Applications:
Aero Space applications, Heater cartridges, Thermistors, RTD, Thermocouple wells, Portable heaters and Tank heaters.


Most Popular Products:

• Red Ice 611HTC: High thermal conductivity with high temperature stability. Rated up to 360 °C. Meets NASA out gassing requirements.
• Red Ice 611: Low Thermally Conductive with high temperature stability. Rated up to 360 °C. Meets NASA out gassing requirements. Commonly used between heating element and plate.
• Red Ice 613: Low cost solution for high temperature application, Rated up to 250 °C.


Property 610 611 611HTC 613
Type
Non Silicone
Non Silicone
Non Silicone
Silicone
Thermal Conductivity W/m °K
1.0
0.8
3.2
1.2
Thermal Resistance  °C-In²/W
0.05
0.06
0.015
0.04
Dielectric Constant @1KHz
4.9
4.8
4.8
4.5
Volume Resistivity Ohm-cm
1014
1014
1014
1014
Operating Temperature Ranges, °C
-55 to 300
-55 to 360
-55 to 360
-55 to 250
 
 
 
Home  |  Thermal Greases & Epoxies  |  Thermal Gap Fillers & Pads  |  Applications/Packaging/Dispensing  |  Contact us

35 Old Dock Rd., Yaphank, NY 11980
Ph.: (631) 345-6509 • Fax: (631) 775 - 4023 E-mail: info@timtronics.com
All contents ⓒ Copyrights 2009-2010 Timtronics. All rights reserved.
 
Designed By E-Design